| A combination of 3 materials for the 21st century, beta titanium, compression molded graphite and tungsten Copper, make for the most technologically advanced component head for 2004. SMT Golf really went the extra mile on the Babylon design. The combination of premium materials is evident on this head as soon as you take it out of the box. Not only did SMT Golf feel the need to jump into the multi-material market, they set out to dominate it through playability and quality. It was during the SMT Golf staff trip to the factory that they noticed dozens of different welders, all working on the same style head. SMT Golf knew that they had 30 grams of weight to play with in the Babylon head and saw that other companies were simply welding weights inside the head near the backskirt. It occurred to SMT Golf that there was no way that it could ever be done the same on any two heads. Thus, the tungsten copper insert in the back heel... always the same, always the same place. The Babylon plays very solid with the lowest center of gravity in the SMT Golf line. It has a reduced spin profile and a high launch angle... almost 3/4 of a degree weaker than stated loft. So be sure to allow for that when ordering. A muted sound due to the graphite composite crown, will not bring attention to the shot but you will most likely not be hitting first from the fairway. Tee this one up and watch it soar. It puts the fun back into your game. The SMT Babylon Titanium Driver is available 7, 8, 9, 10, 11 & 12 degrees (Right Hand Only). This chart is a general guideline. For a detailed measurement chart - Click Here Krooked Stix Shaft Length Chart Height 4'10 to 5'6 5'7 to 6'1 6'2 to 6'4 6'5 to 6'8 Length -1/2 0 +1/2 +1 |
